Best Selling Products
Newly launched Items
All Products
Jumper Pulse Oximeter and Thermometer Devices in Bangladesh
Nothing in this range has a product name. Each item is a category word and a model code — JPD-FR203, JPD-HA200, JPD-BS201 — and the code is the only thing that separates one box from the next. Two devices can share every word of their title and differ entirely in what they do.
So the first section below is about reading the code, because that is the skill the grid above actually demands. The rest groups the range by what each device measures. Everything here sits on Arogga’s Medical Devices shelf.
Reading a JPD Code
The prefix never changes. What carries the meaning is the pair of letters after it and the number after those.
- FR — the infrared thermometers.
- HA — the arm blood pressure monitors.
- BS — the body weight scales.
- 500 with no letter pair — the fingertip oximeters, where a trailing letter marks the variant.
The trailing letter is the variant, not the version
An oximeter ending in E and one ending in G are siblings rather than an older and a newer model. The title says what the difference is: one names its display type, the other names its casing colour. Read to the end of the line before deciding one supersedes the other.
A higher number is not a bigger device
The numbers run in series per family, so a scale numbered in the seven hundreds and one numbered in the two hundreds are both scales and neither is the larger. Compare within a letter pair; across one the figures mean nothing to each other.
Fingertip Pulse Oximeters
A fingertip oximeter is a clip that reads oxygen saturation and pulse rate from a fingertip and shows both on a small screen. The range here covers:
- Fingertip Pulse Oximeter Jumper JPD-500E (LED Version)
- Fingertip Pulse Oximeter Jumper JPD-500G (White)
- Fingertip Pulse Oximeter Jumper SPA30
SPA30 breaks the pattern
One oximeter carries no JPD prefix at all. It sits in the same family and does the same job, and if you search the grid for JPD you will miss it. Comparable clips from other makers are filed under Pulse Oximeters.
Infrared Thermometers
These take a reading without touching the skin. Two of them say Dual Mode in the title and one says Non-Contact:
- Jumper Infrared Thermometer Dual Mode (JPD-FR203)
- Jumper Infrared Thermometer Dual Mode (JPD-FR-300)
- Infrared Thermometer Non-Contact Jumper JPD-FR202
The hyphen in FR-300 is not a typing error
Two of these codes run the letters straight into the digits and the third puts a hyphen between them. It is registered that way, so a search for the unhyphenated form will not return it. Other makers’ units sit under Thermometer.
Blood Pressure Monitors
The HA family is upper-arm cuff monitors, and the titles are almost word-for-word identical, so the code at the end is the whole distinction:
- Digital Electronic Blood Pressure Monitor Machine Jumper JPD-HA200
- Digital Electronic Blood Pressure Monitor Machine Jumper JPD-HA300
- Digital Electronic Blood Pressure Monitor Machine Jumper JPD-HA121
Cuff size is the thing the title does not state
An arm cuff has a circumference range it is built for, and none of these titles gives it. That figure is on the product page and on the cuff itself, and it is worth checking against the arm the monitor is for before ordering. Cuffs and spare parts are shelved under Blood Pressure Monitors and Accessories.
Digital Weight Scales
The BS family is floor scales with a lit display. Their titles are the least consistent on the whole grid — the brand word lands in a different place on each one:
- Digital Weight Scale LED Jumper JPD-BS201
- Digital Weight Scale Jumper JPD-BS200 with LED Display & Automatic Power-Off
- JUMPER Digital Body Weight Scale with LED Display – JPD-700C
Why typing the name finds nothing
One of these spells the brand in capitals, one puts it second, one puts it third, and one separates its code with a dash where the others use a space. A search box matches characters, not intentions. Type the code instead. Household scales from every maker sit together under Weight Managment Products & Scales.
The Fetal Doppler
The Jumper Wireless Baby Heart Rate Monitor Fetal Doppler is a handheld ultrasound unit that picks up foetal heart sounds through a probe held against the abdomen. It is the one item in the range that is not a measuring instrument for an adult, and it is also the one people ask most about.
What a doppler produces is a sound and a number on a display. Everything that follows from that — whether the reading is expected, whether it means anything at this stage of a pregnancy, what to do about it — belongs to the midwife or obstetrician following the pregnancy. A device bought at home does not change who answers those questions.
Where the Device Stops and a Clinician Starts
Every item on this page produces a figure. None of them interprets one, and the gap between those two things is where home monitoring goes wrong.
A reading is data, not a diagnosis
Oxygen saturation, blood pressure, temperature and foetal heart rate are all numbers a doctor reads in context — alongside symptoms, history and often other tests. Arogga lists these as consumer instruments and makes no claim about what any particular reading means for any particular person.
The manual is in the box
Operating steps, calibration, battery handling and the measurement conditions each unit assumes are all in the printed manual that ships with it. Follow that rather than a general guide written for a different model, and take a device to a pharmacist or clinic if a reading and how you feel disagree.
What Changes the Price
- What is being measured. A cuff and pump assembly, an infrared sensor and a load cell are three unrelated pieces of engineering, and the device families are priced independently of each other.
- Display. Within the oximeter family the screen type is named in the title, and it is one of the few differences the listing spells out.
- Generation. Later codes in a family tend to carry extra functions, which the product page lists and the title does not.
- Import batch. These are imported units, so landed cost moves with the shipment rather than with the model.
Because the titles are so close to each other, a figure you remember from last month may belong to the sibling code rather than the one in front of you. Match the code first, then look at what it costs.
About Jumper
Jumper is a Chinese medical device manufacturer based in Shenzhen, producing home and clinical monitoring equipment under the JPD model series. The brand is known for fingertip pulse oximeters and handheld foetal dopplers, and its units are sold internationally through distributors rather than through its own retail network.
Its catalogue covers pulse oximetry, infrared and contact thermometry, upper-arm and wrist blood pressure monitoring, body weight and body composition scales, nebulisers, foetal dopplers and a range of veterinary monitors. Products are identified by model code across every family, which is the convention that gives this range its JPD and SPA designations.
The company positions itself around portable, battery-powered instruments intended for use outside a hospital setting. In Bangladesh its devices reach buyers through medical equipment importers and pharmacy retail, including online pharmacy platforms.
Buying Jumper Devices Online in Bangladesh
Order by code rather than by description. Copy the model string from the product page into your order note if you are buying more than one item, because two titles on this grid can differ by a single character and arrive as different devices.
When the parcel arrives, check that the warranty card and the manual are both inside and that the model printed on the unit matches the model on the listing. Keep the carton until the first reading has been taken; a replacement is simpler with it than without it.
Frequently Asked Questions
1. What does the JPD in front of every model mean?
It is the manufacturer’s own series prefix and it appears on nearly every device it makes. The useful part is what follows it: FR for the infrared thermometers, HA for the arm blood pressure monitors, BS for the scales.
2. How is the JPD-500E different from the JPD-500G?
Each title states its own distinguishing feature. One is listed as the LED version, naming its display, and the other is listed by casing colour. They sit in the same oximeter family and share the prefix and the number.
3. Why can I not find a Jumper scale by typing the brand name?
Because the word sits in a different position in each scale title, and one of them is in capitals. Search on the model code, which is stable across all of them.
4. Is there a cuff size listed for the blood pressure monitors?
Not in the title. Open the product page for the arm circumference the cuff is made for, and measure the arm it is intended for before ordering.
5. Who should I speak to about using a fetal doppler at home?
The midwife or obstetrician looking after the pregnancy. They can say whether home listening has any place in a particular case and how any reading should be treated. A device listing is not the right source for that, and this page does not try to be.
6. Jumper device-এর দাম কীভাবে দেখব?
উপরের তালিকায় প্রতিটা model আলাদা করে দেওয়া আছে, আর দাম বসানো থাকে ওই নির্দিষ্ট listing-এর সাথে। একই রকম নামের দুইটা device-এর মধ্যে পার্থক্য শুধু শেষের code-টুকুতে, তাই code মিলিয়ে তারপর দাম দেখুন।
7. Oximeter বা BP machine-এর reading নিয়ে সন্দেহ হলে কী করব?
ডাক্তার বা ফার্মাসিস্টের সাথে কথা বলুন। যন্ত্র শুধু একটা সংখ্যা দেখায় — সেই সংখ্যা আপনার ক্ষেত্রে কী বোঝায়, সেটা বলার কাজ যন্ত্রের না। বাক্সের ভেতরের manual-এ কোন অবস্থায় reading নিতে হবে তা লেখা থাকে, ওটা আগে পড়ে নিন।