Report in 12 hours
Booked 32 times
D - Dimer
Exploring Fibrin Degradation for Comprehensive Assessment of Thrombotic Disorders
৳1500
৳1500
Sample Type
blood
Fasting Required
No
Description
Having a high D-dimer level in your blood can be a sign of a blood clotting disorder since the level of D-dimer can rise greatly when there's significant formation and breakdown of blood clots in your body.
Covid Safety
Assured
Free Report
Counselling
Recommended for You
How our test process works!
"Our body creates substances to help heal and stay healthy. Among these is a protein called D-dimer, which is a small protein made when blood clots dissolve in the body. A D-dimer test checks for D-dimer levels in the blood.
Blood clotting is an essential process in the body. It prevents excessive blood loss during injury. Without blood clotting, you stand the chance of losing too much blood, which can prove fatal. In the normal course, blood clots dissolve as the injury heals. Sometimes, blood clots may not dissolve after the injury heals. In other cases, they may sometimes form without a real injury. These are typical signs of a blood clotting disorder that can prove quite dangerous.
Clotting episodes are usually referred to as thrombotic episodes. A D-dimer test is conducted to eliminate the possibility of thrombotic episodes and to help diagnose other conditions related to thrombosis. For individuals at risk of thrombosis, a D-dimer blood test can determine the likely presence of a clot. The D-dimer report will let you know whether further investigations are required.
Detection of blood clots is essential since they can obstruct blood flow in the body. In the legs, they can cut off supply and cause pain, swelling and tissue damage. A clot in the lungs called a pulmonary embolism, may prevent breathing and prove fatal. The major cause of heart attacks is clots in the arteries. When an artery in the brain is blocked, it leads to a stroke. In such cases, the D-dimer test can prove exceptionally useful.
In addition, the D-dimer test is very valuable in diagnosing a condition called DIC or disseminated intravascular coagulation. The body forms numerous small blood clots that leave the individual prone to excessive bleeding.
In addition, the D-dimer blood test also helps understand the risk and progression in cases of pneumonia and COVID-19.
Cases of venous thromboembolism or thrombosis in the veins are as prevalent in India as anywhere else in the world. Awareness of the condition is significantly lower in the country. With an incidence of about 17 for every 10,000 admissions, the cases have been noted to be on the rise, owing mainly due to greater awareness among the physician community. This increased awareness could help reduce the severity of the cases as well as the number of related deaths.
Other Names of D-Dimer Test
You may notice your physician or a hospital refer to the D-dimer test using the below terms:
Fibrin degradation fragment
Fragment D-dimer
Who needs the D-dimer test and why?
Although the D-dimer blood test is only an indicator of a clot and does not tell you exactly where it is located, it can help avoid fatalities. The D-dimer test is an important marker that can help rule out serious conditions like:
Pulmonary embolism or clot in the lungs
Deep vein thrombosis
Stroke
Heart attack
Your doctor may suggest a D-dimer procedure in suspected cases of deep vein thrombosis if the following symptoms are noticed:
Swelling or discolouration in the leg
Pain or tenderness in the leg, most commonly in only one limb
In the case of pulmonary embolisms, the suspected symptoms that require a D-dimer test report include:
Laboured breathing or shortness of breath
Elevated heart rate
Lung-related pain (pain in chest and back)
Severe coughing
Blood in the sputum
Apart from these symptoms, there is an increased risk of thrombosis in the listed cases. A D-dimer test is used in the diagnosis of possible clots in the following ailments:
Acute gastrointestinal haemorrhage
Acute coronary syndromes
Thrombosis in the arteries or veins
Aortic dissection
Infections
Malignancy
Trauma
Stroke
Sickle cell disease
Superficial thrombosis
Pre-eclampsia
There are also certain non-pathological cases that demand a D-dimer test to rule out clots and thrombosis. They are:
Pregnancy
Post-operative cases
Cigarette smokers
Elderly
There are also certain emergencies that require an immediate D-dimer report. When there is a suspected case of DIC or disseminated intravascular coagulation or a snake bite, you may need to undergo the test at once."
Thrombosis, Pulmonary embolism, Stroke, Disseminated intravascular coagulation, COVID-19
D-dimer test results typically range from less than 500 nanograms per milliliter (ng/mL) to around 2500 ng/mL. Normal levels vary based on age, gender, and the assay method used. Elevated levels may indicate conditions like deep vein thrombosis (DVT), pulmonary embolism (PE), or disseminated intravascular coagulation (DIC).
A D-dimer report will usually give you a D-dimer value. This is what the D-dimer range looks like:
Normal
< 0.50mg/L
Positive
>0.50 mg/L
Here are certain important considerations when comparing D-dimer values:
The normal D-dimer range is below 0.50mg/L.
A reading of 0.50 or more indicates a positive result. There is no critical level, value or range in this test.
D-dimer levels are expectedly higher in the elderly and their D-dimer values must be interpreted by a doctor.
Higher levels in the D-dimer test are also likely in individuals who have rheumatoid arthritis.
Once you have your D-dimer results, it is possible to interpret them. Low or normal levels show the absence of any clotting disorder. When the results are on the higher side, it indicates the presence of a clotting disorder. However, it does not specify its kind or location. It is also important to remember that higher levels could also be from instances of recent surgery, heart conditions or pregnancy. When the readings are not within the normal range, further investigation is important to make an accurate diagnosis.
The normal values, parameters, and reference ranges of the test may vary from lab to lab. Please refer to the ranges mentioned in the report and consult a doctor to understand the interpretation of lab reports."""
"The D-dimer test requires the collection of a blood sample. This can be taken at any time of the day and does not require fasting.
Test Preparation
The test itself is rather simple and straightforward. The D-dimer blood test is not a fasting test and can be conducted at any time during the day. It is beneficial to mention any conditions or medication being taken prior to the test. The test itself only takes about five minutes and requires the collection of a blood sample from the arm. No special care is required following a D-dimer test.
Test Inclusions
A D-dimer report will only give you the value of D-dimer in the body. It does not include any other parameters. It is important to remember that the value or the D-dimer result only suggests the presence of clots and does not give any additional information on where the clot may be or how big. Other tests, including scans or ultrasounds, may be requested depending on what the results of D-dimer tests show."
Frequently Asked Question
Yes, certain medications like anticoagulants (blood thinners) can affect D-Dimer levels.
A blood sample is taken from a vein in your arm. The sample is then analyzed in a laboratory to measure the level of D-Dimer.
The D-Dimer test is primarily used to rule out the presence of an inappropriate blood clot (thrombus). It is used in the diagnosis of conditions such as deep vein thrombosis (DVT), pulmonary embolism (PE), and disseminated intravascular coagulation (DIC).
A D-Dimer is a small protein fragment present in the blood after a blood clot dissolves. It is typically measured to assess clot formation and breakdown in the body.
No, fasting is not typically required before a D-Dimer test. You can eat and drink normally before the test.
Elevated D-Dimer levels can indicate the presence of an abnormal blood clot, but they do not specify the location or cause. High levels can be seen in conditions like DVT, PE, DIC, and in situations of significant inflammation or after recent surgery or trauma.
Yes, false positives can occur in conditions such as pregnancy, liver disease, infection, inflammation, trauma, and cancer. False negatives can occur if the blood clot is small or if the sample is taken too early or too late.
Normal levels of D-Dimer vary depending on the testing method and laboratory. Generally, a D-Dimer level of less than 0.5 micrograms per milliliter (μg/mL) is considered normal.
Results can be available within a few hours to a day, depending on the laboratory's workflow.
If your D-Dimer levels are elevated, your healthcare provider may recommend further testing to determine the cause of the high levels and to rule out serious conditions like DVT or PE.
Report in 12 hours
Booked 32 times
D - Dimer
Exploring Fibrin Degradation for Comprehensive Assessment of Thrombotic Disorders
৳1500
৳1500
Sample Type
blood
Fasting Required
No
Description
Having a high D-dimer level in your blood can be a sign of a blood clotting disorder since the level of D-dimer can rise greatly when there's significant formation and breakdown of blood clots in your body.
Covid Safety
Assured
Free Report
Counselling
